Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

Supply chain network design under the risk of uncertain disruptions

Facility disruptions in the supply chain often lead to catastrophic consequences, although they occur rarely. The low frequency and non-repeatability of disruptive events also make it impossible to estimate the disruption probability accurately. Therefore, we construct an uncertain programming model to design the three-echelon supply chain network with the disruption risk, in which disruptions are considered as uncertain events. Under the constraint of satisfying customer demands, the model optimises the selection of retailers with uncertain disruptions and the assignment of customers and retailers, in order to minimise the expected total cost of network design. In addition, we simplify the proposed model by analysing its properties and further linearise the simplified model. A Lagrangian relaxation algorithm for the linearised model and a genetic algorithm for the simplified model are developed to solve medium-scale problems and large-scale problems, respectively. Finally, we illustrate the effectiveness of proposed models and algorithms through several numerical examples.     

海水淡化用空心锥喷嘴喷淋性能理论及实验研究

设计开发一种具有高通量、低流阻特征的空心锥喷嘴,并通过理论与实验方法研究空心锥喷嘴的喷淋性能,基于准自由涡理论建立空心锥喷嘴内部流体流动的数学模型,阐明流量系数、喷淋锥角、喷嘴流量与喷嘴结构参数之间的定量关系,并利用多效蒸馏海水淡化喷淋实验台对理论计算结果进行实验测试和验证。研究结果表明:正常工作状态下喷嘴流量系数、喷淋锥角、喷淋流量等参数理论值与测量值之间的误差小于5%,验证了设计模型的准确性。同时根据实验测试数据,拟合得到该类型空心锥喷嘴喷淋锥角与雷诺数之间的经验公式,可为蒸馏海水淡化用大流量空心锥喷嘴的结构设计、工艺选型提供理论指导和数据支持。     

PEG修饰的镍钴层状双氢氧化物微球抗菌及溶血性能研究

双氧水作为常用的活性氧试剂广泛应用于清洗创面、去除痂皮、清洗带恶臭的创伤。但是由于其具有强烈刺激性,常采用表面涂抹的方式应用,不可注入体内。并且其常用的浓度高于生理水平,会对健康组织有一定毒性,甚至会延迟伤口愈合。为了解决这个问题,设计了一种利用聚乙二醇修饰的生物相容性好的镍钴层状双氢氧化物微球PEG-Ni/Co-LDHs,使得其具有较高的抑菌效果,同时能减少双氧水的用量。采用一步沉淀法合成了PEG-Ni/Co-LDHs,使用SEM、TEM、XRD等方法对PEG-Ni/Co-LDHs的结构进行表征,结果显示该材料的分散性能好,粒径约为470 nm,微球呈花状结构,由薄层似花瓣结构层层组装而成。PEG-Ni/Co-LDHs具有过氧化物酶的活性,这使得在双氧水的作用下能有效产生羟基自由基,高效抑制革兰氏阴性菌(大肠杆菌)和革兰氏阳性菌(金黄色葡萄球菌)增殖,高浓度时与双氧水联合作用,细菌成活率分别为32%和19%。采集大鼠血细胞对纳米材料PEG-Ni/Co-LDHs进行溶血性能研究,发现在高浓度时,其溶血率低于12%,未出现明显的溶血作用,具有很好的生物相容性。研究结果表明,PEG-Ni/Co-LDHs具有高抗菌活性和低溶血毒性的特点,为其今后作为抗菌剂在生物体内应用奠定了研究基础。     

两相流测量技术研究

两相流测量技术对理解与预测流体动力学、过程操作与控制、分析与优化流体控制装置等都有重大意义.本文根据在测量过程中是否对流体产生干扰将其分为干扰式和非干扰式测量技术,并从两个方面综述了现有的技术手段和工作原理,总结了各类测量技术的可测量参数类型、应用限制、时间和空间分辨率等.此外,本文还分析了两相流测量的难点与未来发展方向,旨在为复杂工业过程中的过程参数检测提供一定的参考和指引.     

SiO2对邯郸球团矿抗压强度的影响

抗压强度是球团矿的重要指标,直接影响高炉内炉况顺行及生产指标。改变球团矿的化学成份,球团矿微观结构也将受到影响,矿物结构发生改变,对球团矿的抗压强度也有不同的影响。本试验采用邯钢生产现场所用的邯邢精粉、安徽精粉、沙河精粉、燕山矿粉等五种矿粉进行造球,利用偏光显微镜等检测手段对不同矿粉的球团矿的抗压强度进行研究。从试验结果分析得出:SiO_2含量在3%时抗压强度最强,在7%时抗压强度最差。     

Gel Polymer Electrolyte with Anion‐Trapping Boron Moieties via One‐Step Synthesis for Symmetrical Supercapacitors

A novel gel polymer electrolyte (GPE) which is based on new synthesized boron‐containing monomer, benzyl methacrylate, 1 m LiClO₄/N,N‐dimethylformamidel liquid electrolyte solution is prepared through a one‐step synthesis method. The boron‐containing GPE (B‐GPE) not only displays excellent mechanical behavior, favorable thermal stability, but also exhibits an outstanding ionic conductivity of 2.33 mS cm^?1 at room temperature owing to the presence of anion‐trapping boron sites. The lithium ion transference in this gel polymer film at ambient temperature is 0.60. Furthermore, the symmetrical supercapacitor which is fabricated with B‐GPE as electrolyte and reduced graphene oxide as electrode demonstrates a broad potential window of 2.3 V. The specific capacitance of symmetrical B‐GPE supercapacitors retains 90% after 3000 charge–discharge cycles at current density of 1 A g^?1.     

Microwave dielectric properties of SrLa[Ga1−x(Mg0.5Ti0.5)x]O4 and SrLa[Ga1−x(Zn0.5Ti0.5)x]O4 (x = 0.2-0.8) ceramics

SrLa[Ga_1−x(R_0.5Ti_0.5)_x]O₄ (R = Mg, Zn) ceramics were prepared by a standard solid state sintering method. The single-phase ceramics with K₂NiF₄-type layered perovskite structure and I4/mmm space group were obtained, indicating that SrLa(R_0.5Ti_0.5) and SrLaGaO₄ can form the unlimited solid solutions. With increasing x for R = Mg and Zn, ε_r increases monotonously, the Qf value first increases and then decreases, while τ_f increases from a negative to a positive value. The optimized microwave dielectric properties were obtained as following: ε_r = 23.3, Qf = 89 400 GHz, τ_f = −0.8 ppm/°C for SrLa[Ga_0.6(Mg_0.5Ti_0.5)_0.4]O₄ and ε_r = 23.3, Qf = 76 200 GHz, τ_f = 0.2 ppm/°C for SrLa[Ga_0.7(Zn_0.5Ti_0.5)_0.3]O₄, indicating that the present solid solution ceramics are the promising candidates as microwave resonator materials for the telecommunication applications.